NDICEA Newsletter

May 2025

NDICEA Logo

For English, please scroll down

Beste NDICEA gebruiker,

Dat is de tweede NDICEA nieuwsbrief, verzonden aan allen die een account hebben bij ndiceaweb. De nieuwsbrief verschijnt onregelmatig, als er zaken gedeeld moeten worden met de gebruikers. Meestal zal het gaan om nieuwe functionaliteit of aanpassing in de rekenregels.

U kunt u zelf afmelden voor ontvangst van de nieuwsbrief. Ga daarvoor naar ndiceaweb.eu, klik op het edit account icoon rechts boven in beeld, en haal het vinkje weg bij Nieuwsbrief.

De nieuwsbrief kunt u ook downloaden vanaf de website.

Voor alle andere vragen over NDICEA, neem contact op via info@ndiceaweb.eu.

1. Gras/grasklaver/luzerne

In de gewassen lijst staan nu alleen nog maar bovenstaande keuzes. Bij meerjarige teelten moet per jaar gekozen worden; u kunt de begin- of einddatum niet veranderen buiten het betreffende jaar, alleen erbinnen. Per jaar kunt u dan de opbrengst aangeven en het gebruik (maaien, beweiden, mulchen).

2. Water- en stikstofdynamiek

Er zijn twee resultaat schermen toegevoegd: water/stikstof grafieken, en een water/stikstof tabel.

De grafieken geven de dagwaarden van

  • Water uitspoeling (mm)
  • N uitspoeling (kg)
  • N-concentratie (mg/L)
  • Water capillaire opstijging (mm)
  • N via cap. Opstijging (kg)

Standaard staan de vijf grafieken weergegeven. U kunt zelf kiezen welke grafiek u wel of niet wilt zien.

De tabel geeft een geaccumuleerde waarde over een periode van zes maanden: 1 oktober t/m 31 maart, en 1 april t/m 30 september. Bij het begin en het einde van het scenario worden de waarden van drie maanden berekend.

De getoonde geaccumuleerde waarden:

Uit de bewortelbare zone:

  • Water uitspoeling (mm)
  • Stikstof uitspoeling (kg/ha)
  • N-concentratie (mg N/L)

In het bovenste grondwater

  • Stikstof in grondwater (kg/ha)
  • N-concentratie in bovenste grondwater (mg N/L)

U kunt kiezen voor weergave van de concentratie: N of NO3

Het verschil tussen de uitspoeling uit de bewortelbare zone en de inspoeling in het bovenste grondwater wordt berekend met de uitspoelfractie (Fraters et al 2012). De gebruikte uitspoelfractie voor bouwland en grasland staat bovenaan de tabel weergegeven.

3. Koppeling met bodemkaart NL

Dit is al enige tijd operationeel. Uw perceel heeft coördinaten. Op basis hiervan wordt in de bodemkaart van Nederland de textuur en de grondwatertrap geselecteerd.

  • De textuur wordt gebruikt om de pF-curve te bepalen. U kunt de grondsoort (en daarmee de textuur) zelf aanpassen in het scherm Edit Bodem.
  • De grondwatertrap wordt gebruikt om een inschatting te maken van de laagste grondwaterstand in de zomer en de hoogste grondwaterstand in de winter. Deze waarden kunt u zelf aanpassen in het scherm Edit bodem.

4. Berekening bulkdichtheid bodem

Ook al enige tijd operationeel: uit de textuur wordt de bulkdichtheid van de grond berekend, in plaats van het gebruik van de default waarde 1,35. Dit heeft gevolgen voor de berekende initiële hoeveelheid berekende koolstof / organische stof in uw perceel, dat afgeleid wordt van het organische stof percentage. Dat percentage kunt u zelf invullen in het scherm Edit bodem.

Dear NDICEA user,

This is the second NDICEA newsletter, sent to all who have an account at ndiceaweb. The newsletter is published irregularly, when things need to be shared with the users. Usually it will be about new functionality or adjustments in the calculation algorithms.

You can unsubscribe from receiving the newsletter yourself. To do so, go to ndiceaweb.eu, click on the edit account icon at the top right of the screen, and remove the check mark from Newsletter. You can also download the newsletter from the website.

1. Grass/GrassClover/Alfalfa

The crop list now only contains the above choices. For perennial crops, you must choose per year; you cannot change the start or end date outside the year in question, only within it. You can then indicate the yield and the use (mowing, grazing, mulching) per year.

2. Water and nitrogen dynamics

Two result screens have been added: water/nitrogen graphs, and a water/nitrogen table.

The graphs show the daily values of:

  • Water leaching (mm)
  • N leaching (kg)
  • N concentration (mg/L)
  • Water capillary rise (mm)
  • N via cap. rise (kg)

The five graphs are shown by default. You can choose which graph you want to see or not.

The table shows an accumulated value over a period of six months: 1 October to 31 March, and 1 April to 30 September. At the beginning and end of the scenario, the values of three months are calculated.

The accumulated values shown:

From the root zone:

  • Water leaching (mm)
  • Nitrogen leaching (kg/ha)
  • N concentration (mg N/L)

In upper groundwater

  • Nitrogen in groundwater (kg/ha)
  • N concentration in upper groundwater (mg N/L)

You can choose to display the concentration: N or NO3

The difference between the leaching from the root zone and the leaching into the upper groundwater is calculated with the leaching fraction (Fraters et al 2012). The leaching fraction used for arable land and grassland is shown at the top of the table.

3. Link with the Dutch Soil database

This has been operational for some time now. Your plot has coordinates. Based on this, the texture and the groundwater level are selected in the soil map of the Netherlands.

  • The texture is used to determine the pF curve. You can adjust the soil type (and therefore the texture) yourself in the Edit Soil screen.
  • The groundwater level is used to estimate the lowest groundwater level in summer and the highest groundwater level in winter. You can adjust these values yourself in the Edit Soil screen.

4. Calculation soil bulk density

Also operational for some time now: the bulk density of the soil is calculated from the texture, instead of using the default value of 1.35. This has consequences for the calculated initial amount of calculated carbon / organic matter in your plot, which is derived from the organic matter percentage. You can enter that percentage yourself in the Edit soil screen.